Posts for tag: dental implants
We've been using bridges to replace missing teeth for decades. Now, recently-developed implant-supported bridges are even more dependable, promising greater durability and less interference with remaining natural teeth.
But just like other restorations, you'll need to keep implant bridges clean to ensure their longevity. Although both the bridge and implants are impervious to disease, the supporting gums and bone aren't. If they become infected, they can break down and your restoration will fail.
Cleaning an implant-supported bridge includes flossing around each of the implants to remove dental plaque, a thin film of food particles and bacteria most responsible for dental disease. To perform this task, you'll have to pass the floss between the bridge and gums to access the sides of each implant.
To help make it easier, you can use a tool like a floss threader, a thin, shaft-like device with a loop on one end and a needle-like point on the other. You'll first thread about 18" of floss through the end and then pass the threader between the bridge and gums with the sharp end toward the tongue.
With the threader completely through, you'll then wrap the floss around your fingers as with regular flossing and move the floss up and down each side of the implants you can access. You'll then pull the floss out, reload the threader and move to the next section, repeating this process until you've flossed each side of each implant.
You can also use pre-cut floss with a stiffened end to thread between the bridge and gums or an interproximal brush with a thin bristled head that can reach underneath the bridge. And you might consider using an oral irrigator, a pump device that sprays a stream of pressurized water to remove and flush away plaque around implants.
To round out your hygiene efforts, be sure you visit your dentist at least twice a year for dental cleanings. Your dentist can also advise you and give you training on keeping your implants clear of disease-causing plaque. Cleaning around your implants will help ensure your restoration will last.
If you would like more information on caring for your dental restoration, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Oral Hygiene for Fixed Bridgework.”
For generations, dentures have helped people avoid the dire consequences of total teeth loss. Now, implant technology is making them even better.
Composed of life-like prosthetic teeth fixed within a plastic or resin gum-colored base, dentures are manufactured to fit an individual patient’s mouth for maximum fit, comfort and performance. But dentures also have a critical drawback—they can’t stop bone loss in the jaw.
Bone is constantly regenerating as older cells dissolve and then are replaced by newer cells. In the jawbone, the forces generated when we chew travel through the teeth to the bone and help stimulate this new cell growth. When teeth are missing, though, the bone doesn’t receive this stimulus and may not regenerate at a healthy rate, resulting in gradual bone loss.
Dentures can’t transmit this chewing stimulus to the bone. In fact, the pressure they produce as they rest on top of the gums may actually accelerate bone loss. Over time then, a denture’s once secure and comfortable fit becomes loose.
In the past, most patients with loose dentures have had them relined with new dental material to improve fit, or have new dentures created to conform to the changed contours of the jaws. But implant technology now offers another alternative.
Implants are in essence a tooth root replacement. Dentists surgically implant a titanium metal post directly into the jawbone that naturally attracts bone cells to grow and adhere to it over time (a process called osseointegration). This not only creates a secure and lasting hold, it can also stop or even reverse bone loss.
Most people know implants as single tooth replacements with a porcelain crown attached to the titanium post. But a few strategically placed implants can also support either removable or fixed dentures. Removable dentures (also called overdentures) usually need only 3 or 4 implants on the top jaw and 2 on the bottom jaw for support through built-in connectors in the dentures that attach to the implants. A fixed bridge may require 4-6 implants to which they are permanently attached.
There are pros and cons for each of these options and they’re both more expensive than traditional dentures. In the long run, though, implant-supported dentures could be more beneficial for your bone health and hold their fit longer.
Teeth-replacing dental implants not only look life-like, they’re made to last. For one thing, the metals and dental materials used in them are impervious to bacterial infection.
But that doesn’t mean implants are impervious to failure. Implants depend on the bone and other natural mouth structures for support. If the bone becomes weakened due to disease, the implant could become unstable and ultimately fail.
Peri-implantitis, the condition that can lead to this kind of failure, is a major concern for implant longevity. It’s a type of periodontal (gum) disease triggered by plaque, a thin film of food particles that can build up quickly in the absence of adequate brushing and flossing. The gum tissues around the implant become infected and inflamed.
If the infection isn’t properly treated with renewed oral hygiene and clinical plaque removal, it could spread below the gum line and begin to damage the underlying gum tissues and bone. This could destroy the all-important connection between the titanium implant post and the bone. The implant could eventually loosen and become completely detached from the bone.
The key is early intervention before the bone becomes damaged. Besides plaque removal we may also need to apply antibiotics in some form to control the growth of disease-causing bacteria. If the disease has fairly advanced we may also need to consider surgical repair to strengthen the attachment between implant and bone.
You can help to avoid peri-implantitis altogether by practicing consistent daily brushing and flossing around all your teeth including the implant, and seeing your dentist at least twice a year for cleanings and checkups. And by all means see your dentist if you notice any signs of gum swelling, redness or bleeding. Staying on top of your gum health will help not only the natural tissues and remaining teeth in your mouth, it will help preserve your implants for decades to come.
You've seen ads for “Teeth in One Day” that promise immediate implant placement at the same time you have the problem tooth removed. But this presumes the gums and underlying bone are healthy and able to support and protect the implant. If that's not the case, it may be ill-advised to place an implant on the same day.
Even with immediate placement, there will be a small degree of bone and gum opening or space around the implant after it's placed into the socket. This can often be remedied by placing a bone graft and sometimes a gum graft when we install the implant. It's also possible for natural healing to gradually fill in the space, but we'll need to monitor the site carefully for several weeks.
On the other hand, if we detect significant bone loss (or strongly suspect it will occur), immediate placement may not be an option — there's not enough bone or it's too weak to support an implant. In this case, it's necessary to wait on placement and focus on improving the bone health and quantity, beginning when we remove the old tooth and place a bone graft.
After completing the extraction, we typically place a bone graft in the empty socket. The graft will become a “scaffold” for new bone cells to grow upon. We may then allow about two to four months for new bone to partially replenish the area and then place the implant. The bone will continue to regenerate as it grows and attaches to the titanium implant to create a solid attachment.
If the site, however, still appears fragile even after partial bone growth, we may opt to wait another two to four months before attempting placement. From a long-term perspective, this is the best scenario for ensuring a durable foundation for the implant. It also allows for a socket severely compromised by disease to heal more thoroughly.
To determine which of these placement scenarios is best for you, we'll first need to conduct a thorough dental examination. From there we'll be in a better position to discuss the right implant timeline for your situation. Our main goal is to ensure we can securely place your implant in just the right position to achieve the most successful and attractive result.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Implant Timelines for Replacing Missing Teeth.”
In real life he was a hard-charging basketball player through high school and college. In TV and the movies, he has gone head-to-head with serial killers, assorted bad guys… even mysterious paranormal forces. So would you believe that David Duchovny, who played Agent Fox Mulder in The X-Files and starred in countless other large and small-screen productions, lost his front teeth… in an elevator accident?
“I was running for the elevator at my high school when the door shut on my arm,” he explained. “The next thing I knew, I was waking up in the hospital. I had fainted, fallen on my face, and knocked out my two front teeth.” Looking at Duchovny now, you’d never know his front teeth weren’t natural. But that’s not “movie magic” — it’s the art and science of modern dentistry.
How do dentists go about replacing lost teeth with natural-looking prosthetics? Today, there are two widely used tooth replacement procedures: dental implants and bridgework. When a natural tooth can’t be saved — due to advanced decay, periodontal disease, or an accident like Duchovny’s — these methods offer good looking, fully functional replacements. So what’s the difference between the two? Essentially, it’s a matter of how the replacement teeth are supported.
With state-of-the-art dental implants, support for the replacement tooth (or teeth) comes from small titanium inserts, which are implanted directly into the bone of the jaw. In time these become fused with the bone itself, providing a solid anchorage. What’s more, they actually help prevent the bone loss that naturally occurs after tooth loss. The crowns — lifelike replacements for the visible part of the tooth — are securely attached to the implants via special connectors called abutments.
In traditional bridgework, the existing natural teeth on either side of a gap are used to support the replacement crowns that “bridge” the gap. Here’s how it works: A one-piece unit is custom-fabricated, consisting of prosthetic crowns to replace missing teeth, plus caps to cover the adjacent (abutment) teeth on each side. Those abutment teeth must be shaped so the caps can fit over them; this is done by carefully removing some of the outer tooth material. Then the whole bridge unit is securely cemented in place.
While both systems have been used successfully for decades, bridgework is now being gradually supplanted by implants. That’s because dental implants don’t have any negative impact on nearby healthy teeth, while bridgework requires that abutment teeth be shaped for crowns, and puts additional stresses on them. Dental implants also generally last far longer than bridges — the rest of your life, if given proper care. However, they are initially more expensive (though they may prove more economical in the long run), and not everyone is a candidate for the minor surgery they require.
Which method is best for you? Don’t try using paranormal powers to find out: Come in and talk to us. If you would like more information about tooth replacement, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine articles “Crowns & Bridgework,” and “Dental Implants.”